Ethanol-biodiesel blends cut marine fuel emissions by up to 31%, GCGF-NTU study finds

A joint GCGF-NTU study found that ethanol-biodiesel-diesel blends ran reliably in pilot marine engine tests, with the highest blend achieving an estimated 28–31% reduction in lifecycle greenhouse gas emissions.

Blends of ethanol, biodiesel and conventional diesel have demonstrated reliable performance in pilot-scale marine engine tests, with the highest blend achieving an estimated 28–31% reduction in lifecycle greenhouse gas emissions, according to interim findings from a joint study by the Global Centre for Green Fuels (GCGF) and Nanyang Technological University, Singapore (NTU Singapore).

The study, titled Feasibility Study on Adopting Ethanol as a Sustainable Marine Fuel for Ships in Singapore, examines the potential of ethanol-based fuel blends for use in existing conventional marine diesel engines. The research also compares ethanol with five other alternative marine fuels: methanol, fatty acid methyl ester (FAME) biodiesel, liquefied natural gas (LNG), ammonia and hydrogen.

The highest blend tested, designated E30B30D40, contained 30% ethanol, 30% biodiesel and 40% conventional marine diesel by volume. It replaced 60% of conventional diesel by volume, equivalent to 53% on an energy basis.

The study estimated lifecycle greenhouse gas emissions intensity for this blend at 64.91–67.90 gCO₂eq/MJ, compared with 94 gCO₂eq/MJ for conventional fossil diesel. This represents a potential reduction of 28–31%, based on the study’s well-to-wake feedstock assumptions.

Ethanol blends maintain thermal efficiency in marine engine trials

The pilot trials were conducted using a four-stroke marine diesel engine of harbour-craft size, with technical support from the Seatrium New Energy Laboratory at NTU’s School of Mechanical and Aerospace Engineering.

Researchers tested three formulations: E10B10D80, E20B20D60 and E30B30D40. All three ran reliably during pilot engine operations, with preliminary measurements indicating that brake thermal efficiency was maintained or slightly improved across the tested conditions.

For the E30 blend, estimated brake thermal efficiency increased by up to 0.73 percentage points. However, maximum engine power output decreased by up to 12.9%, reflecting ethanol’s lower energy density compared with fossil diesel.

The emissions tests also recorded reductions in carbon monoxide (CO) across all three blends, with the E30 formulation achieving a reduction of up to 43%.

The E10 and E20 blends reduced nitrogen oxide (NOₓ) emissions at matched-power test points, while results for E30 varied according to engine load. The researchers also found that the three-component blends moderated the increase in NOₓ emissions typically associated with using pure biodiesel.

Biodiesel helps overcome ethanol-diesel blending challenges

A key technical challenge in using ethanol in conventional marine diesel engines is its inability to form a stable blend with diesel on its own.

The researchers found that biodiesel can act as a co-solvent, enabling ethanol and diesel to form stable, single-phase fuel blends. A 1:1 ethanol-to-biodiesel ratio provided stability at the highest ethanol concentration tested, while lower co-solvent ratios are being investigated.

The biodiesel used in this phase of testing was palm methyl ester (PME). The researchers indicated that other biodiesel types could be assessed in subsequent phases.

However, the blends are not yet considered drop-in marine fuels under current rules. Their flash-point characteristics and fuel-system requirements remain under assessment, meaning further technical and regulatory work will be necessary before commercial use.

Study compares ethanol with five alternative marine fuels

Beyond engine testing, the interim study assessed ethanol against methanol, FAME biodiesel, LNG, ammonia and hydrogen across production readiness, operational safety and commercial cost.

Ethanol received the highest production-readiness score, at 9 out of 9, reflecting its established global manufacturing and distribution infrastructure. Global ethanol production reached approximately 118.5 billion litres in 2024, according to the study, with supply projected to reach 80.9 million tonnes of very low sulphur fuel oil (VLSFO) equivalent by 2033.

For operational safety, ethanol scored 8 out of 9. The assessment noted that ethanol is less acutely toxic than methanol and remains liquid under ambient conditions. However, its low flash point requires dedicated ignition controls, vapour management systems and material compatibility measures aboard vessels.

The study assessed ethanol’s commercial cost at US$956–1,451 per VLSFO-equivalent tonne. At the midpoint of this range, ethanol was approximately 42% more expensive than fossil fuel oil. It also requires around 1.9 cubic metres of bunker storage space per tonne of VLSFO energy equivalent.

The assessment scores represent the study’s scientific evaluation and do not constitute formal certification or regulatory endorsement.

GCGF and NTU to undertake further testing

Clarence Woo, Managing Director of the Global Centre for Green Fuels, said:

“Most of the world’s fleet will be running on conventional engines for years to come, so decarbonisation cannot wait for newbuilds alone. These interim results show that ethanol–biodiesel–diesel blends can run successfully in a conventional marine diesel engine with comparable efficiency, and ethanol is already produced at industrial scale. Through this work with NTU MESD, GCGF is building the evidence needed to show how ethanol can play a practical role in marine decarbonisation. We look forward to presenting the findings to the industry at the IBIA Alternative Marine Energy Forum during Hong Kong Maritime Week, and to working with partners to take the testing further.”

Dr Shu Fen Tan, Research Lead and Senior Research Fellow at NTU’s Maritime Energy and Sustainable Development Centre of Excellence, said:

“Ship operators and maritime regulators require rigorous, independent evidence before alternative fuel blends are introduced into commercial bunkering. Our collaborative work with GCGF bridges comprehensive fuel comparison with hands-on engine validation. By examining chemical blend stability alongside physical combustion performance, NTU MESD is delivering the empirical data the maritime sector needs to make informed transitional decisions.”

GCGF and NTU MESD are scheduled to present the interim findings at the IBIA – Fueling Now and the Future: Hong Kong Forum on Alternative Marine Energy on 19 November 2026, during Hong Kong Maritime Week.

The second phase of the research will involve expanded engine testing and durability assessments. The final comprehensive study report is scheduled for publication in 2027.

spot_imgspot_img

Subscribe to our Newsletter

Aditi Mishra
Aditi Mishra
Aditi Mishra is a India based writer and communications professional with a keen interest in bioenergy, sustainability, and the evolving climate landscape. With a background in journalism, marketing, content, and English literature, she brings a research-driven and editorial perspective to stories and conversations shaping the energy transition. Aditi closely follows developments across the bioenergy sector, exploring emerging technologies, industry trends, policy shifts, and the role of bioenergy in building a more sustainable energy future. As a climate enthusiast, she is particularly interested in making complex developments in the energy and climate space accessible, engaging, and meaningful to a wider audience.
Latest news
spot_img
Related news

LEAVE A REPLY

Please enter your comment!
Please enter your name here